Top Page > Read This First > Managing this machine > Specifying and Changing the Machine's Settings > Specifying the destination using the LDAP server

Specifying the destination using the LDAP server

You can search for a destination registered in the Address Book using the LDAP server.

To use this function with GX 3000SF, the network interface board must be installed.

Connect the machine to the network.
Specify the network settings, such as the machine's IP address and the gateway address.
Specify the LDAP settings, as the LDAP server, and the LDAP port number.
Specify the destination.

For details about procedures and settings in step 1, see “Installing the Printer Driver (Network Interface Board) ”, Quick Installation Guide.
For details about procedures and settings in step 2, see Network Settings .
For details about procedures and settings in step 3, see Settings Required to Use LDAP Server .
For details about procedures and settings in step 4, see Selecting the E-Mail Destination in [Search] Mode .