Manual RX Mode
This section explains how to receive a fax manually. If the incoming call is a fax, you can switch to fax mode to receive it.
An external telephone is required to use this machine as a telephone.
If the machine rings, press the [On hook Dial] key or pick up the handset of the external telephone.
You will hear a low tone from the internal speaker.
*Using Handset...*1
Press the [B&W Start] key.
The reception starts.
After reception, the initial screen appears.
To cancel a fax during reception, press the [Clear/Stop] key.
If an original is loaded in the ADF and its destination specified when you press the [B&W Start] key in step 2., the machine scans and faxes the original. Before pressing the [B&W Start] key, make sure no original is loaded in the ADF.
