Skip header
For screen readerStandard Web browser page
 

Top Page > Using the Facsimile Function > Sending a Fax by Immediate Transmission Mode

Sending a Fax by Immediate Transmission Mode

You can use immediate transmission mode to send normal faxes.

This function is not available for Internet Fax.

You can only specify one destination per transmission. If you specify multiple destinations, then transmission mode will automatically change to memory transmission.

  1. Press the [Memory Trans.] key.

    panel keys illustration

    Make sure the [Memory Trans.] indicator is unlit.

  2. Place the original in the ADF.

    16:00    Std    100%
     -Set Orig- Fax Only

    To change the scan settings, press the [Resolution] key, and then specify the settings.

  3. Specify a destination.

                      
    SUB=Down arrow key            [1]

    If you press a Quick Dial key, the destination assigned to it appears on the display and transmission begins automatically. You do not have to press the [B&W Start] key as in step 4.. (below).

    If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.

  4. Press the [B&W Start] key.

    panel keys illustration

    The machine simultaneously scans and faxes the original.

    After transmission, the initial screen appears.

Reference