Skip header
For screen readerStandard Web browser page
 

Top Page > Using the Copy Function > Setting and Placing Originals > Placing Originals > Placing Originals on the Exposure Glass

Placing Originals on the Exposure Glass

Place originals on the exposure glass.

Important

  • Do not lift the exposure glass cover, ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.

  1. Lift the ADF

  2. Place the original face down on the exposure glass. The original should be aligned to the rear left corner.

    Start with the first page to be copied.

    layout

    1. Positioning mark

    2. Left scale

  3. Lower the ADF

Note

  • Straighten curls in the originals before placing them on the exposure glass.

  • Do not load badly curled originals.

  • Load the original squarely.