Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Network and System Settings Reference > Connecting the Machine > Connecting to the Interface

Connecting to the Interface

This section explains how to identify the machine's interface and connect the machine according to the network environment.

Important

Main unit illustration numbered callout illustration

  1. 10BASE-T/100BASE-TX port

    Port for connecting the 10BASE-T or 100BASE-TX cable

  2. Optional board slot

    Install an optional interface board in this slot.

    The slot can accommodate the file format converter or one of the following interface boards:

    • Wireless LAN board: Required if you want to connect this machine to a wireless LAN. When installed, this unit allows you to connect the machine to an IEEE 802.11 a or IEEE 802.11 b/g wireless LAN.

    • Gigabit Ethernet board: Required if you want to connect the machine to a network using a 1000BASE-T, 100BASE-TX, or 10BASE-T cable.

  3. USB 2.0 [Type B] port

    Port for connecting the USB2.0 [Type B] interface cable

  4. USB Host Interface

    Port for connecting the USB interface cable

    Use this interface to connect the machine to a card authentication device.

Note

Related topics

Connecting to the Ethernet Interface Region A icon(mainly Europe and Asia)
Connecting to the Ethernet Interface Region B icon(mainly North America)
Connecting to the Gigabit Ethernet Interface Region A icon(mainly Europe and Asia)
Connecting to the Gigabit Ethernet Interface Region B icon(mainly North America)
Connecting to the USB (Type B) Interface
Connecting a Device to the Machine's USB Host Interface
Connecting to the Wireless LAN Interface
TopPreviousNext
Copyright (C) 2011