Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > About This Machine > Adding Paper > Changing the Paper Size > Changing the Paper Size in Trays 1 - 4 > Changing to 81/2 × 13 or 81/2 × 14 size paper

Changing to 81/2 × 13 or 81/2 × 14 size paper

When loading 81/2 × 13Portrait or 81/2 × 14Portrait size paper in trays 1 hyphen 4, extend the tray as follows.

  1. Lift and pull tray 1 carefully, and then pull it out with both hands.

    Place the tray on a flat surface.

  2. Slide the catches inwards to unlock the tray.

    Changing the paper size illustration

  3. Slide the tray until it stops.

    Changing the paper size illustration

  4. Return the catches to their original positions.

    Changing the paper size illustration

  5. Square the paper and load it print side down.

    Do not stack paper over the limit mark.

    Changing the paper size illustration

  6. Align the end and side fences gently against the paper you loaded.

  7. Hold the tray with both hands, slide it along the rails of the machine, and then push it straight in.

TopPreviousNext
Copyright (C) 2011