Network Firmware is program to function the Network Interface Board. This software is program, which can update the network firmware by running the downloaded software.
-Important Note-
1. When updating firmware, the RPCS raster printer driver for the machine must be installed on the computer beforehand.
2. When updating the NIC firmware to v5.04 or newer on machines produced before the 2009 international Energy Star requirements (v1.1) were revised, the suffix "a" will be added at the end of the version number.
For example, if upgrading the NIC firmware to v5.0.4 or later:
- NIC firmware that supports the Energy Star v1.1 requirements: v5.04
- NIC firmware that does not support the Energy Star 1.1 requirements: v5.04a
|